WORK SUPERINTENDENT

CODE NO. A 01/020/109
WORK SUPERINTENDENT
AGRICULTURE DEPARTMENT

Maximum: 100 marks Time: 1 hour and 15 minutes

1. The difference between back bearing and fore bearing is:
(A) 180 ° (B) 360°
(C) 90° (D) 270°

2. If bearing of OA = 32°, and bearing of OB = 112°, then
(A) 132° (B) 144°
(C) 116° (D)80°

3. The representative fraction of the scale 1 cm = 5 km is:
(A) 1/500,000 (B) 1/5
(C) 1/500 (D) 1/5000

4. The invar tape is made up of:
(A) Alloy of nickel and copper (B) Alloy of brass and steel
(C) Alloy of nickel and steel (D) Stainless steel

5. The instrument used for the measurement of slope of ground is:
(A) Clinometer (B) Prismatic Compass
(C) Alidade (D) Cross-staff

6. Isogonic lines are the lines having same:
(A) elevation (B) bearing
(C) declination (D) dip

7. The process of forming the image of the object in the plane of cross hairs is called:
(A) focussing the eye-piece (B) focussing the objective
(C) adjusting the cross hairs (D) removing the parallax

8. Least count of a metric levelling staff is:
(A) 0.005 m (B) 5 cm
(C) 0.05m (D) 50mm